DEEN
Request a sample →
GE · Graffiti Remover

Fast, safe, economical. 3 to 15 minutes of dwell time, 6 to 20 m² per litre.

High-efficiency cleaner against graffiti, paints and markings on concrete, brick, stone, metal, glass and wood. High paint-dissolving power with controlled material protection, environmentally considerate.

  • High paint-dissolving power
  • Surface-friendly
  • Very economical
Request a free sample→ View technical data
3–15min dwell time
20m² per litre (max.)
3–15 mindwell time
100%Made in Germany
01 · Applications

Suitable for nearly all surfaces.

From brick to vehicle paint. Six areas of application.

  • BK

    Concrete, brick & stone

    The most common use case. Graffiti on facades, walls and pavements made of concrete, brick, natural stone or marble. Extend the dwell time on porous surfaces.

  • MG

    Metal, glass & vehicles

    On smooth surfaces the remover works especially fast, just 3 to 4 minutes of dwell time. On vehicles, always run a compatibility test on the paint first.

  • GH

    Coated surfaces & wood

    On surfaces with an anti-graffiti coating the cleaning goes even faster. Also suitable for painted and unpainted wood.

  • SR

    Signs & noise barriers

    Traffic signs, noise barriers, posts. Cleans reliably without attacking the reflective layer or the coating.

  • TR

    Transit & public transport

    Stops, shelters, tunnels, trains and buses. Fast restoration of the public appearance.

  • IN

    Industry & logistics

    Warehouses, container walls, gates, steel beams. Efficient for regular cleaning cycles in industrial settings.

02 · How it works

High paint-dissolving power, controlled material protection.

The remover lifts spray paints, acrylic and alkyd paints as well as permanent-marker tags out of the surface. The dwell time is matched to the substrate: 3 to 4 minutes on smooth surfaces, up to 15 minutes on porous substrates.

  • DISSOLVING POWERhigh
  • MATERIAL PROTECTIONcontrolled
  • VARIANTSstandard / gel
  • SUBSTRATE-FRIENDLYyes
See the technical data→
Graffiti removal in professional use Graffiti removal in professional use
03 · Application

Five-step protocol.

Test, apply, dwell, remove, protect.

  1. 01

    Test compatibility

    Test in an inconspicuous spot, especially on vehicle paint, wood and sensitive surfaces. Anti-graffiti coated surfaces are suitable as well.

    0.2 h
  2. 02

    Apply

    Apply evenly with a brush, roller or sprayer. On vertical surfaces use the gel variant so the product does not run off.

    0.2 h
  3. 03

    Let it dwell

    3 to 4 minutes on smooth surfaces, 10 to 15 minutes on porous substrates. Do not let it dry out, re-moisten if needed.

    3–15 min
  4. 04

    Remove

    Wipe off with a soft cloth or sponge. On stubborn areas, brush in briefly and let it dwell once more.

    0.3 h
  5. 05

    Rinse & protect

    Rinse clean with water. Then apply an anti-graffiti coating so that the next graffiti is much faster to remove.

    0.3 h

On anti-graffiti coated surfaces a water rinse is often already enough.Anti-graffiti coating →

04 · Technical data

Complete. Transparent.

All relevant figures. Full technical data sheet and safety data sheet available on request.

ACTION dissolving
DWELL TIME 3–15min
CONSUMPTION 200–500ml / m²
COVERAGE 2–5m² / L
BASE solvent
APPLICATION TEMP +5 – +25°C
MULTI-SURFACE yes
GENTLE controlled
Form
Solvent-based specialty cleaner, ready to use (standard and gel variant)
Action
High paint-dissolving power with controlled material protection
Ingredients
Dimethyl sulfoxide < 50 %, ethyl acetate ≤ 10 %, dimethyl succinate 5–10 %, dipentene < 1 %
Properties
Very economical, surface-friendly, pH-neutral toward the substrate
Suitable for
Concrete, brick, natural stone, marble, metal, glass, wood, painted surfaces, anti-graffiti coated surfaces
Not suitable for
Acrylic glass and soft plastics without a prior test. On vehicles a compatibility test is recommended.
Safety
Flammable liquid (H226). Wear protective gloves and eye protection, use outdoors or in a well-ventilated area. See the safety data sheet.
Packaging
1 L, 5 L, 10 L, 25 L canister, 200 L drum. IBC on request.
Technical Data Sheet · on request Safety Data Sheet · on request

Note: Always test in an inconspicuous spot first. Be especially careful during the test on vehicle paint, marble and wood surfaces. Rinse clean with water after cleaning.

Complementary application

Moscow metro, vandalism removed without residue.

Combined with our anti-graffiti coating, the graffiti remover closes the restoration loop.

Moscow metro, public-transport vandalism restored without residue RU Moscow
  • 3–15 mindwell time
  • Multi-
    Surface    concrete, stone, metal, glass
  • Gentleeven on sensitive substrates

The anti-graffiti coating protects preventively, the graffiti remover ensures residue- free cleaning if something does get sprayed again. Together this forms a closed restoration loop, exactly what public-transport vandalism protection calls for.

A solvent-based specialty cleaner with high paint-dissolving power, surface-friendly even on sensitive materials. Three to fifteen minutes of dwell time depending on the substrate.

Product used Graffiti Remover
Request more references →
05 · Frequently asked questions

Six answers.

Q01Which surfaces can I use the graffiti remover on?+

The graffiti remover is suitable for mineral surfaces (concrete, brick, stone, marble, wood), metal, glass and painted surfaces. On vehicles we recommend a compatibility test in an inconspicuous spot beforehand.

Q02Does the remover damage the surface?+

No, our graffiti remover is specially formulated to dissolve paints without attacking the surface underneath. Even on sensitive painted surfaces or glass it delivers excellent results without damage.

Q03How long does the remover need to dwell?+

On smooth surfaces about 3 to 4 minutes of dwell time is enough. On porous surfaces such as concrete or brick the dwell time should be extended to achieve an optimal result.

Q04How much graffiti remover do I need per square metre?+

Consumption is around 0.2 to 0.5 litres per square metre (200 to 500 ml/m²), depending on the surface and how heavy the graffiti is. That gives a coverage of 2 to 5 m² per litre.

Q05What do I do about paint shadows after cleaning?+

Any paint shadows that remain after cleaning can be removed with our dedicated NANO4YOU shadow remover. This gives you a completely residue-free result.

Q06Is the graffiti remover safe to use?+

It is a solvent-based specialty cleaner (dimethyl sulfoxide, ethyl acetate). Used properly with protective gloves, eye protection and adequate ventilation, it is safe to work with, outdoors or in well-ventilated rooms. The cleaner does not change the pH value of the substrate and is surface-friendly. Read the safety data sheet before first use.

Order or sample

Test it on a graffiti spot.

Send us the substrate and the approximate area. We will recommend the right variant (standard or gel) and quantity and, on request, send a sample (plus shipping). Distributor and trade inquiries welcome.

Send an inquiry→ Advice: +49 6826 965290 →
More

Next steps.

NextContact & samplesRequest a data sheet or a product sample→NextEnglish homeAll NANO4YOU surface protection→