Permanent transparent matte coating for concrete, clinker brick, natural stone and exposed concrete. Graffiti does not penetrate the substrate and can be removed without residue. Fully breathable, 0 % change in appearance, Florida-tested.
From the school to the noise barrier. Six application areas.
Schools, railway stations, stadiums and administrative buildings. Permanent protection against vandalism, quick cleaning with water or a pressure washer.
Noise barriers, bridge piers, retaining walls, tunnels. Many cleaning cycles without recoating.
Exposed and faced masonry on historic buildings. Sd value 0.09 to 0.19 m (BAM-tested), highly breathable, ideal for listed and heritage-protected structures.
High-quality exposed concrete facades. Highly breathable, transparent and matte, no change in appearance.
Workshops, fuel stations, warehouses. Chemical-resistant, UV-stable, weatherproof (-40 to +110 C, Florida-tested).
Bus stops, shelters, metro stations. Cuts cleaning and restoration costs significantly.
The permanent transparent coating forms a durable, closed protective layer on the surface. Spray paint only bonds to the surface and can later be removed without residue using water or a pressure washer. Sd value 0.09 to 0.19 m, fully breathable.
Anti-graffiti coating on a heritage-protected building 2 coats are mandatory for full BAM performance.
The surface must be dry, clean and sound. On exposed concrete and natural stone, check absorbency first.
0.5 hFully remove any paint residue, stickers and old coatings. A clean bond is the condition for full protective performance.
1-4 hApply 100 to 125 g/m2 evenly with brush, roller or airless sprayer. Airless is recommended for large surfaces.
2-6 hLet the first coat dry for 4 to 6 hours, then apply the second coat at the same rate. Total consumption 200 to 250 g/m2 for full protective performance.
4-6 hFully load-bearing after 24 hours. Protect from rain while curing. Later cleaning with water or a pressure washer, many cycles without recoating.
24 hFor large projects and public tenders we support with sample areas and on-site consultation.Contact us →
All relevant values. Full technical data sheet and safety data sheet available on request.
Note: Always test on an inconspicuous area first. 2 coats are required for full BAM performance. For large exposed-concrete projects a sample area is recommended.
Over 2 billion passengers a year. Protected ahead of the 2018 FIFA World Cup.
Ahead of the 2018 FIFA World Cup, parts of the Moscow Metro were protected with our anti-graffiti coating. The underground palaces, one of the most heavily used metro systems in the world, stay magnificent for the long term.
Many cleaning cycles are possible without recoating. Sprayed paint does not penetrate the substrate but can be removed without residue.
The transparent coating forms a permanent protective layer on the surface. Sprayed paint does not penetrate the substrate and can later be removed without residue using water or a pressure washer. Many cleaning cycles are possible without recoating.
Our anti-graffiti coating is BAM-tested for over 50 cleaning cycles without any change to the coating. It is highly breathable and approved for exposed concrete. For specific projects we provide data sheets and test reports on request.
No, 0 % change in appearance. Once dry the coating is transparent and matte. It changes neither color, gloss nor texture, ideal for exposed concrete and heritage-protected buildings.
Sd value 0.09 to 0.19 m (BAM-tested on primed concrete), which is highly breathable. Water vapor can still leave the masonry, the structure keeps breathing. Important for historic facades and exposed concrete.
With correct application in 2 coats, at least 10 years, and longer depending on weather exposure. Florida-tested (-40 to +110 C). A refresh only becomes advisable after many cleaning cycles.
Yes. Standard containers 1 kg, 7 kg and 35 kg hobbock, larger containers on request. For public tenders we support with technical data sheets, sample areas and project-based costing. White-label labeling is available for trade partners.
The price depends on area, substrate and number of coats, so we quote per project. The coating is available in 1 kg, 7 kg and 35 kg containers, with larger containers on request. Send us the area and substrate and we will prepare a suitable quote.
Our anti-graffiti coating is a permanent, transparent anti-graffiti coating, not a pigmented paint and not a color. It does not change the appearance and survives many cleaning cycles without recoating, unlike sacrificial systems that must be reapplied after every cleaning.
Send us the square meters and the substrate. We recommend the right quantity for 2 coats and, on request, send a sample (plus shipping). For tenders we support with technical data sheets and sample areas. Distributor and trade inquiries welcome.
